🔧 Working Principle
Mud is pumped into a manifold that distributes it to multiple small-diameter hydrocyclones (cones), typically 4 to 5 inches in diameter. Under high feed pressure, the centrifugal force inside each cone separates heavier solids toward the wall, which are discharged through the apex (underflow). The cleaned liquid (overflow) returns to the mud system. The underflow, which is a thick slurry of fine solids, is usually discharged onto a shale shaker screen or into a mud cleaner for further dewatering.
📊 Key Features
Small cone diameter: Typically 4–5 inches, enabling finer separation than a desander.
High cone count: Usually 8–20 cones per unit to handle high flow rates.
Cut point: Removes particles larger than 15–25 microns.
Wear-resistant cones: Made of polyurethane, ceramic, or high-chroma cast iron for long service life.
Compact manifold design: Ensures even pressure distribution to all cones.
📏 Key Performance Parameters
Processing Capacity: 500–1,500 GPM depending on cone quantity and size.
Cone Size: 4 inch or 5 inch diameter.
Cone Quantity: Typically 8–20 cones.
Separation Cut Point: 15–25 microns.
Feed Pressure: 0.2–0.4 MPa (30–60 psi) for optimal performance.
Motor Power: Usually 15–45 kW for the feed pump.
📐 Common Standards
API RP 13C: For screen performance evaluation (when integrated with a shaker).
API Spec 7K: For drilling and well servicing equipment.
ISO 9001: Quality management for manufacturers.
💡 Selection Guidelines
For high-flow rigs: Choose larger models with more cones to match the mud circulation rate.
For fine separation: Use 4-inch cones for a finer cut point (15–20 microns).
For heavy mud weight: Ensure the feed pump provides adequate pressure and the cones are wear-resistant.
System integration: A desilter is usually placed after the desander and before the decanter centrifuge in a complete solids control system. It is often combined with a desander on a common skid as a mud cleaner.










