🔧 Working Principle
Drilling fluid returning from the wellbore flows onto a vibrating screen surface. The high-frequency vibration (typically 1,500–2,000 rpm) and adjustable elliptical or linear motion cause the fluid to pass through the screen mesh, while larger cuttings bounce and travel along the screen to the discharge end for disposal.
📊 Main Types
By Motion Pattern
Linear Motion Shaker: Most common in modern drilling. Cuttings move in a straight line; high capacity and good for heavy solids loading.
Elliptical Motion Shaker: Combines the advantages of linear and circular motion; better for sticky or wet cuttings.
Circular Motion Shaker: Older design; lower capacity, mainly used in small rigs or workover operations.
By Screen Type
Single-Deck: One screen deck; simpler, lower capacity.
Double-Deck: Two stacked decks; higher capacity and finer separation in a compact footprint.
Triple-Deck: Three decks; maximum capacity for high-flow offshore or deepwater rigs.
By Drive System
Electric Motor Driven: Standard for most land and offshore rigs.
Hydraulic Motor Driven: Used in some offshore or hazardous-area applications.
📏 Key Performance Parameters
Screen Mesh: Typically 20–325 mesh; finer mesh gives better separation but lower capacity.
Vibration Frequency: 1,500–2,000 rpm (or up to 2,500 rpm for high-speed shakers).
G-Force: 5–8 G for linear motion shakers; higher G-force improves cuttings conveyance.
Flow Capacity: 500–1,500 GPM depending on model and screen mesh.
Deck Angle: Adjustable from -3° to +5° for optimal pool depth and cuttings dryness.
📐 Common Standards
API RP 13C: Standard for evaluating shale shaker screen performance and labeling.
API Spec 7K: Covers drilling and well servicing equipment, including shale shakers.
ATEX / IECEx: Required for offshore or hazardous-area installations.
💡 Selection Guidelines
For high-flow offshore / deepwater: Choose double or triple-deck linear motion shakers with high G-force.
For sticky or wet formations: Elliptical motion shakers handle difficult cuttings better.
For finer separation: Use finer screens (100–200 mesh) but ensure the shaker has enough G-force and capacity to handle the reduced throughput.
Screen quality matters: API RP 13C compliant screens provide consistent cut points and longer service life.










