🔧 Working Principle
Wet cuttings from the shale shaker are fed into the top of the dryer. Inside the vertical conical basket, a high-speed rotating rotor (typically 900–1,200 rpm) generates strong centrifugal force. This force drives the liquid phase (mud) through the screen mesh, while the dried solids are scraped off the screen by rotating flights and discharged from the bottom. The recovered mud is collected and returned to the mud system for reuse.
📊 Key Features
High centrifugal force: Typically 400–700 G, effectively separating mud from cuttings.
Vertical design: Compact footprint, suitable for offshore platforms and land rigs with limited space.
Adjustable speed: Allows optimization for different cuttings types and mud properties.
Wear-resistant materials: Screen and flights are made of high-hardness alloys or tungsten carbide for long service life.
Low oil content on cuttings: Can reduce oil content to below 3–5% (some models achieve <1%), meeting strict environmental standards.
📏 Key Performance Parameters
Processing Capacity: Typically 20–60 tons/hour of wet cuttings, depending on model.
Screen Mesh: Usually 250–500 mesh (0.5–1.0 mm aperture).
Rotation Speed: 900–1,200 rpm (adjustable).
G-Force: 400–700 G.
Oil Content on Discharge: ≤3–5% (depending on feed conditions and model).
Motor Power: 30–75 kW, depending on capacity.
📐 Common Standards
API RP 13C: For screen performance evaluation.
API Spec 7K: For drilling and well servicing equipment.
Local environmental regulations: Such as zero-discharge requirements for offshore operations.
💡 Selection Guidelines
For offshore zero-discharge: Choose high-G models with fine screens to achieve <1% oil content.
For high-capacity land operations: Select larger models with 40–60 t/h capacity.
For heavy or sticky cuttings: Adjustable speed and proper screen selection are critical.
Consider the complete system: A vertical cuttings dryer is usually paired with a cuttings transfer pump, screw conveyor, and centrifuge for a complete waste management solution.










