成为高精密加工行业标准化
规模化生产服务的优秀提供商
Serving the life of science and
technology civilization.
始终关注客户需求,为客户
企业和员工的共同发展而努力
Serving the life of science and
technology civilization.

诚心 务实 团结
积极进取
Serving the life of science and
technology civilization.

Product
Solid Control Equipment
ProductSolid Control Equipment
Product
Degasser

🔧 Working Principle

Gas-cut mud is drawn into a vacuum chamber by a vacuum pump. Inside the chamber, the mud is spread into a thin film over baffle plates, and the vacuum environment causes the gas to break out of the liquid. The released gas is evacuated by the vacuum pump, while the degassed mud is discharged by a centrifugal pump back to the mud system.

📊 Main Types

Vacuum Degasser

  • The most common type in drilling operations.

  • Uses a vacuum pump to create negative pressure inside the chamber.

  • Suitable for all mud weights and types, including oil-based and water-based mud.

  • Processing capacity typically 200–400 m³/h.

Atmospheric Degasser

  • Uses gravity and agitation to release gas at atmospheric pressure.

  • Simpler and lower cost, but less efficient for heavy or viscous mud.

  • Mainly used for shallow wells or low-gas conditions.

Centrifugal Degasser

  • Uses centrifugal force to separate gas from mud.

  • Compact design, but limited capacity and mainly for small rigs.

📏 Key Performance Parameters

  • Processing Capacity: 200–400 m³/h (vacuum type).

  • Vacuum Degree: Typically -0.03 to -0.05 MPa.

  • Motor Power: 15–45 kW for the main drive and vacuum pump.

  • Inlet/Outlet Size: 4–8 inches depending on model.

  • Separation Efficiency: Can reduce gas content to below 1% in most cases.

📐 Common Standards

  • API Spec 7K: For drilling and well servicing equipment.

  • API RP 13C: For related solids control equipment.

  • ISO 9001: Quality management for manufacturers.

  • ATEX / IECEx: Required for offshore or hazardous-area installations.

💡 Selection Guidelines

  • For high-gas wells: Choose a vacuum degasser with sufficient capacity to match the mud circulation rate.

  • For offshore / hazardous areas: Ensure the unit is ATEX or IECEx certified.

  • For oil-based mud: Vacuum degassers are preferred because they handle gas-cut OBM effectively.

  • System integration: A degasser is usually placed after the shale shaker and before the desander/desilter in a complete solids control system. In some configurations, it is installed after the mud cleaner.

contact
contact us
15011420119
hebeisheng
Copyright ©2020-2026 fang-huang All Rights