🔧 Working Principle
Mud is pumped into the hydrocyclones (cones) under pressure. The centrifugal force inside each cone separates heavier solids to the wall, which are discharged through the apex (underflow) onto the underflow screen. The cleaned liquid (overflow) returns to the mud system. The underflow screen further dewaters the solids before disposal.
📊 Key Components
Desander cones: Typically 8–12 inch diameter; remove particles larger than 40–50 microns.
Desilter cones: Typically 4–5 inch diameter; remove particles larger than 15–25 microns.
Underflow screen: Small linear motion shaker, usually 100–200 mesh, to dewater the discharged solids.
Manifold and valves: For distributing mud to the cones and adjusting pressure.
Skid-mounted frame: Compact design for easy installation and transport.
📏 Key Performance Parameters
Processing Capacity: 500–1,500 GPM depending on cone quantity and size.
Cone Quantity: Typically 2–4 desander cones and 8–20 desilter cones.
Separation Cut Point: 15–50 microns depending on cone size.
Feed Pressure: 0.2–0.4 MPa (30–60 psi) for optimal cyclone performance.
Screen Mesh: 100–200 mesh for the underflow shaker.
📐 Common Standards
API RP 13C: For screen performance evaluation.
API Spec 7K: For drilling and well servicing equipment.
ISO 9001: Quality management for manufacturers.
💡 Selection Guidelines
For high-flow rigs: Choose larger models with more cones and higher GPM capacity.
For fine separation: Use smaller desilter cones (4 inch) to achieve a 15–25 micron cut point.
For heavy mud weight: Ensure the feed pump provides adequate pressure and the cones are wear-resistant.
Integration matters: A mud cleaner is usually placed after the shale shaker and before the decanter centrifuge in a complete solids control system.










