🔧 Working Principle
Liquid nitrogen from an on-board or external tank is drawn by a high-pressure cryogenic pump and pumped into a vaporizer. The vaporizer heats the liquid nitrogen into gas at ambient temperature, which is then discharged through high-pressure manifolds into the well. The truck chassis provides mobility, allowing the unit to move between well sites.
📊 Main Types
By Nitrogen Source
Liquid Nitrogen Converter Unit: Pumps liquid nitrogen through a heat exchanger to deliver high-pressure gas. Requires a separate liquid nitrogen supply tank.
Nitrogen Generator Unit: Extracts nitrogen from air via membrane separation, then compresses it to high pressure. Eliminates the need for liquid nitrogen transport and storage.
By Vaporizer Type
Heat Recovery Type: Uses engine waste heat to vaporize nitrogen; more fuel-efficient.
Direct-Fired Type: Uses diesel burners for vaporization; higher capacity, no open flame in some configurations.
By Mounting
Truck-Mounted: Self-propelled; most common for land operations.
Skid-Mounted / Trailer-Mounted: For offshore platforms or fixed sites.
📏 Key Performance Parameters
Based on typical models from major manufacturers:
| Parameter | Typical Range |
|---|---|
| Maximum Working Pressure | 70 MPa / 105 MPa / 140 MPa (10,000–20,000 psi) |
| Liquid Nitrogen Output | 61–748 L/min |
| Nitrogen Gas Output | 90,000–1,100,000 SCFH |
| Engine Power | 260–1,000 kW |
| Gross Vehicle Weight | 17–33 tons |
For example, the Sany 1000K model has a maximum working pressure of 105 MPa, maximum liquid nitrogen output of 492 L/min, and a total weight of 33 tons.
📐 Common Standards
API Spec 7K: Drilling and well servicing equipment.
API RP 19B: Recommended practice for fracturing (for mixed operations).
DOT / Road Regulations: For truck roadworthiness.
ISO 9001: Quality management for manufacturers.
💡 Selection Guidelines
For routine well kick-off and displacement: A heat recovery unit with 70–105 MPa pressure is typically sufficient.
For high-pressure, high-flow jobs: Choose 105–140 MPa units with higher liquid nitrogen output.
For remote areas without liquid nitrogen supply: Consider a nitrogen generator unit.
For offshore or platform use: Skid-mounted or trailer-mounted configurations are preferred.










