🔧 Working Principle
The coiled tubing is stored on a large diameter reel and straightened as it passes through a gooseneck guide into the injector head. The injector head uses hydraulic motors and chains to grip and push or pull the tubing into or out of the well. Pressure-control equipment (BOP) at the wellhead controls well pressure during operations. The entire system is controlled from a central cabin, with hydraulic power supplied by an on-board power pack.
📊 Main Components
Tubing Reel: Stores and transports the coiled tubing string; capacities vary by tubing diameter and length.
Injector Head: Provides the tractive effort to run and retrieve the tubing; rated by continuous pulling and snubbing capacity.
Gooseneck Guide: Guides the tubing from the reel into the injector head.
Control Cabin: Operator station for monitoring and controlling all operations.
Power Pack: Generates hydraulic and pneumatic power for the system.
Well Control Equipment (BOP): Provides pressure control at the wellhead during operations.
📏 Key Performance Parameters
Based on typical models from major manufacturers:
| Parameter | Typical Range |
|---|---|
| Maximum Working Pressure | 69 MPa / 105 MPa (10,000 / 15,000 psi) |
| Continuous Pulling Capacity | 40,000–200,000 lbs (18–90 tons) |
| Continuous Snubbing Capacity | 20,000–70,000 lbs (9–32 tons) |
| Applicable Tubing O.D. | 1-1/4" to 4-1/2" |
| Max. Tubing Reel Capacity | 2-5/8" × 24,600 ft (7,500 m) or equivalent |
| Maximum Operating Speed | 110–230 ft/min |
For example, the Kerui KTLG-630 model has a continuous lifting force of 200,000 lbs, applicable tubing O.D. of 2"–4-1/2", and maximum operating speed of 110 ft/min. The Jereh LGT630 model offers similar specifications with a BOP working pressure of 10,000 or 15,000 psi.
📐 Common Standards
SY/T 6761-2009: Chinese industrial standard for Coiled Tubing Unit.
API Spec 7K: Drilling and well servicing equipment.
DNV / BV Certification: Available for offshore applications requiring Zone II compliance.
ISO 9001: Quality management for manufacturers.
💡 Selection Guidelines
For offshore platforms: Skid-mounted units with compact footprint and DNV/BV certification are preferred.
For land operations with frequent moves: Truck-mounted or trailer-mounted configurations offer better mobility.
For high-pressure well control: Choose units with 105 MPa BOP systems.
For deep wells: Larger reel capacity and higher pulling capacity are required.
For environmentally sensitive areas: Electric-driven hydraulic power units can reduce carbon footprint.










